FARO Autoclave Technical Service
Do not hesitate to contact us 24/7 to solve your FARO autoclave's malfunction. We have the same-day service opportunity for Pendik, Tuzla, Kartal, Maltepe, Kadıköy and all of Istanbul. We can make a program for Ankara, İzmir, Bursa, Antalya, Konya, Adana and other cities in the near future. Within the framework of the program to be determined for Turkey, Europe and other countries, there is Domestic and International Autoclave Technical Service and Autoclave Installation Service.
FARO Autoclave User Manual
FARO Autoclave Error Codes
For Autoclave Error Code Solution, please review the user manual or contact us.
ER001
ER002
ER003
ER004
ER005
ER006
ER007
ER008
ER009
ER010
ER011
ER012
ER013
ER014
ER015
ER016
ER017
ER018
ER019
ER020
ER021
AL001
AL002
AL003
AL004
AL005
AL006
AL007
AL008
AL009
AL010
AL011
AL012
AL013
AL014
AL015
AL016
Safety Interrupt
Overfill
Pressure equalization
Not Ready
Timeout 1
Vacuum
Timeout 2
Boiler temperature High
Boiler temperature Low
High Pressure
Low Pressure
Theoretical Temperature High
Theoretical Temperature Low
Delta Temperature
Vacuum Test: vacuum
EN 13060
EN 13060
EN 13060
Door open
Water Fill
Empty Drain Tank
Boiler Probe Failure
Wall Probe Fascia
Guasto Probe Fascia
Guasto Probe Fascia
Water Fill Timeout
Pressure Transducer
Door Micro
Safety Micro
Power Failure
Safety Pressure
Bad Memory
Safety Micro
PUSH Error
POP Error
Reset
Safety Micro
When preparing equipment for sterilization, remember, first of all, that it is good practice to take the following precautions when handling and transporting contaminated material:
- Wear rubber gloves of appropriate thickness and a face mask;
- Wash your already gloved hands with an antiseptic detergent;
- Always use an antiseptic detergent;
Use the tray to transport the instruments.
- Never carry them directly in your hand;
- Protect your hands from contact with sharp or pointed parts to avoid the risk of contracting dangerous infections;
- Immediately separate items that should not be sterilized or cannot be supported.
- Wash your hands, still gloved, thoroughly when you have finished working with non-sterile material. All materials and/or instruments to be sterilized must be completely clean and free of any residue (organic/inorganic residues, pieces of paper, cotton/gauze, lime, etc.).
In addition to causing problems during the sterilization process, failure to clean and remove residues can damage instruments and/or the sterilizer.
For your FARO Autoclave Technical Service request, please do not hesitate to contact us 24/7 for your FARO Autoclave Malfunction, Maintenance, FARO Autoclave Repair, Installation and Remote Assistance needs.