HIRAYAMA Autoclave Technical Service
Do not hesitate to contact us 24/7 to solve your HIRAYAMA autoclave's malfunction. We have the same-day service opportunity for Pendik, Tuzla, Kartal, Maltepe, Kadıköy and all of Istanbul. We can make a program for Ankara, İzmir, Bursa, Antalya, Konya, Adana and other cities in the near future. Within the framework of the program to be determined for Turkey, Europe and other countries, there is Domestic and International Autoclave Technical Service, Autoclave Installation Service.
HIRAYAMA Autoclave User Manual
HIRAYAMA Autoclave Error Codes
For Autoclave Error Code Solution, please review the user manual or contact us.
Er1
Er2
Er3
Er4
Er5
Er6
Er7
Er8
Er9
ErL
ErE
ErF
Water shortage alarm
Temperature sensor open circuit
High temperature alarm
Low temperature alarm
Overpressure alarm
Door fault alarm
Exhaust valve alarm
Automatic - water supply unit alarm
Sterilization heater alarm
On/Off handle lock alarm
Drain tank alarm
Float open circuit
Wait until the device has cooled down sufficiently to perform HIRAYAMA Autoclave Maintenance and service operations.
Wait until the water in the container has cooled down sufficiently to remove the drain pan. Otherwise, boiling water and steam will spurt out and you may burn yourself.
The heater is fitted with a temperature sensor and fixing clips that can cut your fingers at the corners. Be careful not to cut your fingers when cleaning the bottom of the boiler or heater.
When replacing the heater, be sure to tighten the heater fixing nuts tightly. If the nuts are loose, water may leak and cause a short circuit.
When replacing the heater, be sure to tighten the terminal retaining nut tightly. If the nut is loose, heat may be generated at the terminal and burn damage may occur.
For your HIRAYAMA Autoclave Technical Service request, please do not hesitate to contact us 24/7 for your Malfunction, Maintenance, HIRAYAMA Autoclave Repair, Installation and Remote Assistance needs.