LABOKLAV Autoclave Technical Service
Do not hesitate to contact us 24/7 to solve your LABOKLAV autoclave's malfunction. We have the same-day service opportunity for Pendik, Tuzla, Kartal, Maltepe, Kadıköy and all of Istanbul. We can make a program for Ankara, İzmir, Bursa, Antalya, Konya, Adana and other cities in the near future. Within the framework of the program to be determined for Turkey, Europe and other countries, there is Domestic and International Autoclave Technical Service, Autoclave Installation Service.
LABOKLAV Autoclave User Manual
LABOKLAV Autoclave Technical Service
For Autoclave Error Code Solution, please review the user manual or contact us.
Er0001
Er0004
Er0006
Er0040
Er0041
Er0042
Er0051
Er0052
Er0053
Er0054
Er0055
Er0056
Er0101
Er0106
Er0108
Er0109
Er0201
Door opened during cycle
Maximum pressure in boiler exceeded
Maximum temperature in boiler exceeded
Steam generator thermostat open
Boiler wall thermostat open
Safety line open
Boiler temperature low
Boiler temperature high
Boiler pressure low
Boiler pressure high
Reference temperature below usable range
Reference temperature above usable range
Door opened at cycle start
Filter change time
Boiler pressure outside atmospheric pressure range
Door closing function: locking cycle broken
Archive Data Error
For your LABOKLAV Autoclave Technical Service request, please do not hesitate to contact us 24/7 for your LABOKLAV Autoclave Malfunction, Maintenance, LABOKLAV Autoclave Repair, Installation and Remote Assistance needs.
The device requires demineralized or distilled water for feed water! Normal tap water / drinking water is not used as feed water! The feed water is manually filled into the tank until it reaches the height of the bottom plate. More water is expelled during the air removal phase.
The device is ready to be connected to a central cooling water source for outlet cooling. This is done to protect the installation on the house side of the drain. In this case, please use the connection. Drinking water is recommended for this condensation cooling function. The pressure in the water source must not be less than 0.5 bar.