TAUCLAVE Autoclave Technical Service
Do not hesitate to contact us 24/7 to solve your TAUCLAVE autoclave's fault. We have the same-day service opportunity for Pendik, Tuzla, Kartal, Maltepe, Kadıköy and all of Istanbul. We can make a program for Ankara, İzmir, Bursa, Antalya, Konya, Adana and other cities in the near future. Within the framework of the program to be determined for Turkey, Europe and other countries, there is Domestic and International Autoclave Technical Service, Autoclave Installation Service.
TAUCLAVE Autoclave User Manual
TAUCLAVE Autoclave Error Codes
For Autoclave Error Code Solution, please review the user manual or contact us.
A00
A01
A02
A03
A04-5
A06
A07
A08
A09
A10
A12
A13
Door open
Clean Water Low
Dirty Water Tank Full
Power Outage
Long time for heating
High pressure
High temperature
Abnormal pressure
Abnormal temperature
Vacuum error
High temperature PTV
High temperature PTC
Each error code is shown on the machine as follows:
- The time display shows the alarm code (example: A01, A02 etc.).
- A long beep is heard, followed by 10 short beeps and then goes silent.
- In the most common case of the A00 (door open) or A01 (insufficient water level) alarm, the warning LEDs also light up.
- In other cases, the ALARM LED flashes and you can find the cause of the alarm from the list below.
- The machine remains in this state until the termination condition, which is determined separately for each alarm, occurs.
- If this (alarm) occurs during the cycle, the cycle is interrupted and the pressure is released.
For your TAU STERIL Autoclave Technical Service request, please do not hesitate to contact us 24/7 for your TAU STERIL Autoclave Failure, Maintenance, TAU STERIL Autoclave Repair, Installation and Remote Assistance needs.