TECNO-GAZ Autoclave Technical Service
Do not hesitate to contact us 24/7 to solve the fault of your TECNO-GAZ autoclave. We have the same-day service opportunity for Pendik, Tuzla, Kartal, Maltepe, Kadıköy and all of Istanbul. We can make a program for Ankara, İzmir, Bursa, Antalya, Konya, Adana and other cities in the near future. Within the framework of the program to be determined for Turkey, Europe and other countries, there is Domestic and International Autoclave Technical Service, Autoclave Installation Service.
TECNO-GAZ Autoclave User Manual
TECNO-GAZ Autoclave Error Codes
For Autoclave Error Code Solution, please review the user manual or contact us.
E 200
E 250
E 300
E 401
E 451
E 461
A 250
A 1
A 11
A 101
A 111
A 121
A 401
A 501
A 551
A 552
A 641
A 651
A 661
A 701
A 751
A 761
A 801
A 901
Low water level
Loaded low level water from demineralizer and cleaned
Dirty water tank full
Door open
Door lock opened
High temperature for vacuum test
Sterilization started without water
Interrupted sterilization
Computer display error
Vacuum not reached within 10 minutes
No vacuum maintenance for first stage VT
No vacuum maintenance for second stage VT
Door opened or closed during cycle
Pressure cannot be maintained
1° temperature sensor error
2° temperature sensor error
Excessive high pressure
Excessive high temperature
Irregular temperature comparison
Working pressure not reached
Low temperature
Error in pressure sensor
Irregular discharge pressure
Power failure
To reset the Tecno-Gaz autoclave, press the Door, Pump and Selection keys (B-DOOR + B-PUMP + B-SELECT) at the same time.
TECNO-GAZ autoclave displays 2 types of error codes, E and A.
E, Errors caused by a reason other than the user or the device.
A, These problems can usually be solved by a device technician.
For your TECNO-GAZ Autoclave Technical Service request, please do not hesitate to contact us 24/7 for your TECNO-GAZ Malfunction, Maintenance, TECNO-GAZ Autoclave Repair, Installation and Remote Assistance needs.